Miniature wooden train track impressions. The mould consists of 13 different interlockable track sections and 2 bridge panels. Everything needed to create endless designs. The mould measures 156mm x 128mm. The track width is 14mm with a depth of 4.5mm.
This mould consists of 4 additional track sections to enable more complex track layouts. Also included are 17 signs and a tunnel entrance. The mould measures 156mm x 128mm.The track width is 14mm with a depth of 4.5mm.The tunnel impression is 47mm high x 40mm wide and 5.5mm deep.
Two moulds. The first mould measures 100mm x 85mm and has impressions for the engine and coal, freight and passenger carriages complete with wheels and bogies. The engine when assembled measures 46mm long x 26mm high x 12mm wide.The second mould measures 103mm x 57mm and consists of impressions for the engine,coal and carriage roofs along with two additional flatbed carriages measuring 35mm and 24mm long, each 14mm wide. Also included are additional wheel impressions.
Mould diameter 76mm. Unicorn head impression measures 60mm high x 55mm wide x 9mm deep.
Mould Dimensions: 100mm x 85mm. Impression sizes: Spark plug 55mm high x 20mm wide x 10mm deep.Spanner length 48mm. Large wheel 30mm diameter x 6mm deep,Drill 47mm high x 41mm wide. Small wheel diameter 15mm.. Brake disc 32mm diameter.
The mould measures 157mm x 109mm. The letter size is 14mm in height x 2,5mm deep. The mould consists of upper and lower case and numbers.
Mould dimensions: 133mm x 81mm. Impression sizes: Large gun 85mm long x 30mm high x 6mm deep. Astronought 40mm high x 20mm wide x 5mm deep.Smallest gun 45mm long x 32mm high x 5mm deep.
The mould measures 61mm diameter. The impressions are 40mm and 29mm high x 20mm and 15mm wide. The trees are made in two halves and when assembled measure 40mm high by 26mm wde and 29mm high by 19mm wide.
The frame measures: 90mm x 90mm x 6mm deep. The additional element impressions in the center measure approximately 25mm in length and between 3.25mm and 4,25mm deep.
The frame impression measures 90mm x 67mm x 6,5mm deep. The additional element in the center measures 22mm high x 3,25mm deep.
Mould dimensions:99mm x 83mm. The depth of the impressions are between 3,0mm and 7,0mm. The large cog bottom right is 39mm diameter. The small cog bottom middle is 20mm diameter.
Mould diameter 77mm. Depth of impressions between 3,5mm and 5,5mm.The length of the impressions are approximately 25mm. The mould consists of 7 different designs.
Mould diameter 77mm. Depth of impressions 2.5mm. The length of the leaves are 30mm.